MODEL :SME-GW2045

washer disinfector dental SME WD2145D

SME-GW2045 is a glassware washer with reduced dimensions projected to work at 1 or 2 washing levels and to treat substances of different nature. Washing chamber 380x480xS80 mm. Possibility of washing and disinfecting.

LABORATORY GLASSWARE WASHER

  • washing up to 95°C – antibacterial thermal disinfection
  • electronic programming: 6 set programs + 2 free programs
  • microprocessor programmable electronic control
  • serial port RS232 for connection to external printer or PC
  • active thermodynamic drying
  • alkaline powder detergent dispenser
  • peristaltic pump for acid liquid neutralizer
  • possibility of installing one additional peristaltic pump
  • washing chamber and internal door in stainless steel AISI 316L
  • external panels in stainless steel AISI 304
  • 2 independent washing levels through telescopic guides
  • external dimensions LxWxH (mm) 450x600x850
  • internal working dimensions LxWxH (mm) 380x480x590
  • incorporated water softener with salt sensor
  • cold water and demineralized water connections
  • electronic door lock system for user safety
  • electrical connection 1P+N 230V 50Hz 3.3Kw Max
  • 60Hz version available
  • schuko plug 16A/250V included
  • upper and lower trolleys D-CS1 and D-CS2 included

Machine options

  • ADU – UNIVERSAL PERISTALTIC PUMP FOR LIQUID ADDITIVES
  • PAD1 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2 – BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • PAD2R – PAD2 RELAY KIT
  • PAD2X – ST. STEEL BOOSTER PUMP FOR NON-PRESSURE DEMINERALIZED WATER
  • TOP45I – BUILT-IN TOP 45 CM
  • WD-LS3060 – DETERGENT LEVEL SENSOR
  • WD-PRINTER – EXTERNAL PRINTER

Slim line under bench Model When Space is Limited

SME-GW2045 is perfect for smaller laboratories facing space restrictions. With an external width of only 450mm, this model is a full 25% narrower than a standard under-bench washer. Naturally, its compact design does not come at the expense of build quality or cleaning results.

SME-GW 2045 – Reliable & with Longevity

When you invest in a washer-disinfector from Moonmed you are creating a legacy of quality that will be appreciated for many years to come.

 Designed for Laboratory Purposes

Why choose a laboratory washer over a domestic (home) dishwasher? The laboratory Glassware washing machines differ to the domestic grade of washer you’d purchase at a white goods store. The Laboratory Glass Washers are specifically designed for laboratory applications. They are Italian designed and made from high quality stainless steel inside and out for reliability and rigorous use. They have specific wash and disinfection programs for organic and inorganic chemical compounds; they have the option for DI (Deionized) or Distilled Water rinse cycles. This small yet powerful machine also offers thermal drying with a built in vapor condenser. There are many types of holders for pipettes, schott Duran jars and all types of Lab glassware and equipment.

SME-GW2045 TECHNICAL FEATURES (All Versions)

Electronic control Microprocessor
Standard programs stored 6
Customizable programs 2
Display with segments and warning light yes
Clock and calendar yes
Reprogrammable phases 8
Phase parameters type of water, detergent quantity, target temperature, extension time in minutes, temperature
Tank internal temperature from room temperature to 95°C
Accuracy 0.1°C
Temperature sensors in tank PT 1000 CLASS B IEC 60751
Display 2 digits
Detergent dosing system Max. 1 powder dispenser and 2 liquid pumps
Detergent level sensor optional
Alkaline powder detergent dispenser yes
Pump to dispense acid neutralized liquid yes
Pump to dispense alkaline liquid detergent optional
Safety lock yes, with electromagnetic release
Safety devices safety thermostats, door interlock
Alarm display 30
Troubleshooting menu yes, using PC connection
Programme editing yes, using 2 spare programs
AUXILIARY FUNCTIONS
Traceability storage of data for 100 most recently run programs
RS232 serial port for PC connection yes
RS232 serial port for printer yes,
Cycle storage yes, WD-TRACE Excel format
Cycle file download yes, WD-TRACE format
WATER SUPPLY (PRESSURE 1 ,5-5 BAR)
Cold water inlet max 42° F hardness
Demineralized water inlet yes, < 20 µS/cm
Demineralized water booster pump optional
Water softener incorporated yes
Recirculation pump 200 L/min
WATER HEATING  
Electrical 3,0 kW max
STEAM CONDENSER   optional
DIMENSIONS LxDxH mm
Outside (with built-in top)InsideNet weight (Kg) 450x620x850 (830)380x480x59061
STAINLESS STEEL
Wash tank ASI 316L
Exterior covering ASI 304
ELECTRICAL POWER SUPPLY
Max. voltage/power I/N/PE 230V – 50Hz kW
NOISE LEVEL max 50 dB

lab printer GW2045

SME-GW2045 CONFIGURATIONS

 

The machine bodies in the BASIC series must be equipped with carriages and supports most suited to the specific treatment requirements of the different types of glassware used in the laboratory.

The various possible machine/carriage configurations described below are meant as a guide to help you choose the most appropriate solution for the type of glassware used.

TWO SPRAYING,’INJECTION LEVELSlab configurations 1 GW2045In this configuration there are two washing levels: lower level with rotary sprayers to hold various supports (beakers, test tubes, flasks). The D-CSI upper base is fitted with the 24-position LM22S injection base. This configuration allows simultaneous washing of narrow-necked and other types of glassware. D-CS2 loner rack: SB9 straight tine support for beakers and flasks to the left, SBI4 spring tine support to the right. Each support occupies 1/2 the rack for machines with width of 45 cm to optimize the load on the rack.
ONE MIXED INJECTION LEVEL
lab configurations 2 GW2045
This configuration allows simultaneous washing of narrow-necked glassware (flasks, and beakers) and 12 pipettes with a maximum height of 510 mm. This is an ideal solution for washing various types of glassware simultaneously without having to use dedicated separate carriages with a greater capacity.
Photo: LPM24 carriage
TWO SPRAYING/INJECTION LEVELS
lab configurations 3 GW2045
In this configuration there are two washing levels: the upper level is fitted with the KP60 seventy-item base for centrifuge vials and test tubes. The lower level is spare.
PhotoD-CS1 upper rack KP60 base. D-CS2 lower rack: SBN9 straight line support for beakers and flasks to the left, SB14 spring line support to the right.
TWO INJECTION LEVELS
lab configurations 4 GW2045
LM46 carriage consisting of two injection levels for a capacity of 46 Items. This version maximizes the injection washing capacity. The maximum height of glassware is 225 mm. Recommended for flasks with volume of 5 to 200 ml, bottles (ISO 4796) up to 1000 ml and flasks up to 1000 ml.
Photo: LM46 carriage composed by 22-position upper rack and 24-position lower rack.

BASIC INSERT TROLLEYS

lab accessories 1 GW2045D-CSI on SME-GW204 model

Upper carriage with sprayer.

Made for stainless steel and suitable for positioning racks and supports.

Dimensions: I x d x h —355x460x80 mm

CS1-1 (not in photo)

Made for stainless steel and suitable for positioning racks and supports.Dimensions: I x d x h 481x468x151 mm

lab accessories 2 GW2045

D-CS2 on SME-GW204S model)

Lower carriage.

Made for stainless steel and suitable for positioning racks and supports.

Dimensions: I x d x h —g7Sx470x5S mm

CS2

Basic lower carriage.

Made for stainless steel and suitable for positioning racks and supports.

Dimensions: x d x h —507x515x58 mm

 

FLASK AND BEAKER SUPPORTS

SB9 (only on SME-GW2045 model)lab accessories 3 GW2045Stainless steel g-position support for tunnels and breakers with volume of 100 ml. Occupies 1/2 of the D-CS1/D-CS2 carriages.Dimensions: I x d x h 420x145x160 mm
SB14 (only on SME-GW204S model)lab accessories 4 GW2045Stainless steel 14-position support for beakers and flasks with volume of 250 to 1000ml. Occupies 1/2 of the DCS1/D-CS2 carriages.Dimensions: I x d x h 422x146x184 mm
SB15lab accessories 5 GW204516-position spring support for flasks, beakers, etc. For use in combination with standard CSI -1/CS2 racks and LM20 carriage.It has a capacity of 16 items and is made of stainless steel. Recommended for flasks with a capacity of up to 1000 ml.SB2B (not in photo): 28-positicn spring support for flasks, beakers, etc. For use in combination with standard CSI -1 /CS2 racks and 0/20 carriage.It has a capacity of 28 items and is made of stainless steel. Recommended for flasks with a capacity up to 1000 ml.

 

 

 

Many more accessories available i.e. Test tube supports Bottle supports, plate and slide supports, petri dish supports, baskets, nets, Special Trolleys. Please send us a request for your accessory needs.

Title:
First Name (required):
Sure-name (required):
E-Mail Address (required):
Company/Organization:
Telephone (required):
Country:
Position:
Address:
Preferred method of contact (required):
Nature of inquiry (required):
Customer type (required):
How you heard about us:
Your Message:

-->